stupid and hard to see but return line for the power steering, a lot closer to where its supposed to be.

redid the output line on the compressor, this was blowing out the cheap rubber hose because the air is HOT, also see the new quick connect close to the guage, will make airing up the fronts much easier

ok before and after, drag link at an angle with the drop pitman arm, perfectly flat with the flat pitman arm

Nothing is easy, finally found it and "bolted" it in, did a little more clearancing of the crossmember and oblonged one of the bolt holes but its in there, note tht the grill is missing, had to remove it to get the lines in :(