Initial test fit assembly of the front passenger spindle,steering arm, brake brackets dust sheild, and brakes. what you don't see is the home built bolt that took me about an hour to make :(.

Final installation of the brake brackets and axles. just need to plumb it and back in she goes.

The bumper painted up and installed. Just need the bolts which will act as recovery points.

Big project of the weekend was pouring this slab. couldn't have done without Jason and material and goods from jmo.

Switched to the wagon for a bit. used these casters to turn the hub snout down with a grinder. you can see the hub centric ring on there now and also pressed in all the studs. These came from the front hubs I got for the disk brake conversion, pressed them out. love the press.

These are the headlight buckets I think or part of them anyway. before and after sandblasting. They were like cadmium coated or something and had some rust in the bottom of them. They are painted up and ready to go.

New guage panel coming together. Cut out with jig saw, drill holes, sandblast and paint.

Not much but this is just for Jmo. New guage panel. Of course my new 1.5 inch guages require a 1.6 inch hole :( good luck to me trying to find a hole saw.