Some more organization with shelves. Added a book shelf above the work bench. Also "stacked" the speakers on the wall to get them off the floor. 

The tranny rebuild station. Hard to tell but all the tranny parts are under the plastic covers. Pretty easy but also daunting not knowing if it will work or not. 

Complete seat install. This seat is much nicer then the 25 dollar pull a part special. 

Rear seat bracket welded on and here you can see the bolts that hold it to the floor. Grade 8 bolts hold the seat to the jeeps subfloor. 

Its been awhile with the holidays and the POWER OUTAGES but we finally got the seat installed. Cut the factory brackets and down and welded on some brackets so we can bolt it to the floor.