minus the fact I broke the tranny cable kickdown the linkage is done.

awesome side track here, redid the tailgate interior panel.

again the notso before but the full after.

crossmember read for sway bar and shiney tranny pan

throttle/transmission linkage, need to get a stud to attach to the upper portion of the throttle linkage

the notso before and notso after, started black and caked with a 1/4inch thick burnt oil, need to weld up a pinhole and paint

TADAH!

Step :2 Fabbing the exhaust pieces and fitting.. (This took just short of a decade)

TO HEAD OR NOT TO HEAD

Here we go in stanadard fashion. Step on is to install a new header without any thought about the non-stock auto. So here is the workaround.

Step one 1: Assess the situation (yep fuggered)