We used the ground as a squaring up tool. It keeps the two bushing ends Parallel to each other.
posted by BOX at 11:01 PM
Sunday, January 15, 2006
We used the ground as a squaring up tool. It keeps the two bushing ends Parallel to each other.
Previous Posts
- Here is the finished end. We found that notching ...
- Here is a example... Right through the center.
- Another close-up.
- Here is the jig that we used for notching the tube...
- Here is the crossmember mount before welded on
- Another shot of burning on the crossmember mount
- The welding light doesn't do so well in the camera
- Burning on the crossmember mount
- This is the crossmember end of the traction bar br...
- We cinched the frame down to simulate ride height ...
0 Comments:
Post a Comment
<< Home