Another close-up.
posted by BOX at 10:51 PM
Sunday, January 15, 2006
Previous Posts
- Here is the jig that we used for notching the tube...
- Here is the crossmember mount before welded on
- Another shot of burning on the crossmember mount
- The welding light doesn't do so well in the camera
- Burning on the crossmember mount
- This is the crossmember end of the traction bar br...
- We cinched the frame down to simulate ride height ...
- can sort of see the bracket in there. We used mag...
- Burning on the traction bar bracket
- First Side of traction bar welded to the axle
0 Comments:
Post a Comment
<< Home