First Side of traction bar welded to the axle
posted by BOX at 10:50 AM
Friday, December 23, 2005
Previous Posts
- Cleaning it up to weld in the bushing mount
- Almost ready to be welded
- Almost square .. watch that bubble
- squaring up the bushing with the link
- Look at me drilling
- Happily drilling away
- Hard to see in this photo but the hole saw went ri...
- We made the bushings using a left over projector m...
- Arne wasted some time making mounts on the engine ...
- Todays task is a traction bar. We started off a l...
0 Comments:
Post a Comment
<< Home