We made the bushings using a left over projector mount. Inside diameter of the pipe was perfect
posted by BOX at 4:53 PM
Saturday, December 17, 2005
We made the bushings using a left over projector mount. Inside diameter of the pipe was perfect
Previous Posts
- Arne wasted some time making mounts on the engine ...
- Todays task is a traction bar. We started off a l...
- He talked me out of keeping the only vintage part....
- grinder clean up of the spot welds
- patch panel for the legacy gas tank
- so seriously the finished product. these pieces h...
- Im an idiot
- at this point we have made two pieces and since ou...
- cleaned up and "finished" product
- cutting out the bracket with pattern and plasma
0 Comments:
Post a Comment
<< Home