This is the crossmember end of the traction bar brackets. The shackle will be vertical from here
posted by BOX at 10:53 AM
Friday, December 23, 2005
This is the crossmember end of the traction bar brackets. The shackle will be vertical from here
Previous Posts
- We cinched the frame down to simulate ride height ...
- can sort of see the bracket in there. We used mag...
- Burning on the traction bar bracket
- First Side of traction bar welded to the axle
- Cleaning it up to weld in the bushing mount
- Almost ready to be welded
- Almost square .. watch that bubble
- squaring up the bushing with the link
- Look at me drilling
- Happily drilling away
0 Comments:
Post a Comment
<< Home