Here is a shot of almost complete traction bar.
posted by BOX at 11:08 PM
Sunday, January 15, 2006
Previous Posts
- We did have to alter the suspension. The passenger...
- We used the ground as a squaring up tool. It keep...
- Here is the finished end. We found that notching ...
- Here is a example... Right through the center.
- Another close-up.
- Here is the jig that we used for notching the tube...
- Here is the crossmember mount before welded on
- Another shot of burning on the crossmember mount
- The welding light doesn't do so well in the camera
- Burning on the crossmember mount
0 Comments:
Post a Comment
<< Home